Blog

We specialize in automated labeling equipment and downstream packaging lines, upholding a commitment to meticulous craftsmanship and customer-centric excellence, with our products exported worldwide.


2021-08-24

Safety Instructions for Labeling Machines

Safety Statement for Labeling Machines Please use the equipment in accordance with the safety instructions to ensure its safe operation for years and maintain it in good working condition. The company shall not be liable for any problems or damage to the equipment resulting from improper use or operation in unsafe environments.


2021-08-24

Daily Adjustment, Maintenance, and Care of Round Bottle Labeling Machines

1. Conveying Mechanism: Adjust the conveying mechanism to ensure that products are smoothly conveyed to the labeling position and discharged without obstruction. Typically, product alignment is adjusted on the left and right sides of the conveyor; refer to the relevant sections in the adjustment chapter for operating procedures. The same adjustment method applies to both the labeling and receiving sections.


2021-08-24

Introduction to the 201 Fully Automatic Vertical Roll‑Press Labeling Machine

Suitable for round-bottle labeling in the pharmaceutical, food, and daily‑chemical industries, it can apply full‑circumference or half‑circumference labels.


2021-08-13

Why has the round-bottle labeling machine stood out?

If it were you, what would be the most important factor when buying packaged goods...?


2021-08-13

Real-time printing labeler enables continuous printing and labeling.

If it were you, what would be the most important factor when buying packaged goods...?


2021-08-13

What are the major benefits of a fully automatic labeling machine?

If it were you, what would be the most important factor when buying packaged goods...?


2021-08-24

What should you do if a flat‑surface labeling machine malfunctions?

The center of the marking brush is aligned with the label, and the two sides are symmetrical. The marking brush is perpendicular to the container surface. The overlap gap between adjacent sweeping strokes of the pressing brush is: 10–15 mm for a single pressing brush, and 5–10 mm for a combined pressing brush. The distance between the cleaning brush and the sponge is 1–2 mm. Adjustment of the bottle‑pressing head: when no bottle is present, the bottle‑pressing head should be 20 mm lower than when a bottle is in place.


More News

Contact Us

EPIN

Address: Room 801, Building 2, No. 333 Xiangfu Road, Liaobu Town, Dongguan City, Guangdong Province

Contact phone number: +86-13412581312 (WeChat number is the same)

Email: yipin@epinauto.com  

Website: www.epinauto.com