Description

Sealing corner without crease, good effect 8-10 boxes/min

Product introduction
The automatic corner sealing machine is the carton after the carton is sealed up and down in the middle of the front sealing machine, and then enters the 90 degree corner machine, and the box is pushed into the corner sealing machine by the push plate. After the photoelectric detection, the machine is controlled by the carton and automatically adjusted according to the carton specifications. Machine width and height. The four corners of the carton are automatically sealed at the same time. The sealing speed is fast. The corners of the carton are folded without wrinkles. The upper and lower corners of the carton are automatically sealed and smoothed at the same time. It is simple, convenient and fast without manual adjustment of the machine. It is suitable for customers whose product requirements are higher than that of external packaging, and manufacturers who require strict protection of internal products.
It is widely used in food, medicine, beverage, tobacco, daily chemical, automobile, cable, electronics and other industries.

 

Product features
1. The design of this machine is based on simple operation, economical durability, safety, and the lowest failure rate;
2. Manually adjust the width and height of the machine according to the carton specifications, which is suitable for carton sealing of the same specifications at the same time;
3. After the carton is sealed up and down in the middle of the front sealing machine, it enters the 90-degree corner mechanism and is pushed into the corner sealing machine by the push plate to seal the box; the upper and lower corners of the carton are automatically sealed and smoothed at the same time;
4. The operation is simple and convenient, the applicability is strong, the sealing is beautiful, fast, labor-saving, and high-efficiency;
5. Equipped with blade protection device. Avoid accidental stabbing during operation;
6. This machine can be combined with GPA, GPB and GPC models to complete the “H” type sealing.


Product parameters

Product model EP10
Conveying speed 0-20m/min
Maximum packaging size L320-500mm×W200-500mm×H180-500mm
Table height Min. H500mm Max.H750mm
Use air source 6kg/square centimeter
Power supply 220/380V, 1ф -3ф , 50/60Hz
Applicable tape W48mm/60mm/75mmxL1000 code
Machine size L1900×W11300×H1530
Machine weight 400kg

 

Keywords:

MESSAGE

Professional Service Team Answers